Hotends

High-flow, standard, and specialty hotends. Specs, compatibility, and where to buy.

How we rate

A verdict is our call on whether a hotend is worth buying, judged against the others in its flow class. Verdicts are our own judgement, based on community support and feedback.

Verdicts

Benchmark
The best in its flow class, the one every other hotend in that class gets compared to. One per class at most.
Value Pick
Not the best, but the best bang for buck: most of what the Benchmark gives for meaningfully less money. Free print-it-yourself designs often land here.
Contender
Solid and worth considering, neither the best nor the cheapest.
Skip
Superseded, poor value, or not worth buying.

The four are options, not slots to fill: a class can have no Benchmark or no Value Pick. The line under each verdict carries the nuance.

Flow class

Standard flow
Under 50 mm³/s, our editorial class, set from the maker's published figure or a credited independent test; where neither exists it's our call, and the hotend's page says so.
High flow
50 to 79 mm³/s, our editorial class, set from the maker's published figure or a credited independent test; where neither exists it's our call, and the hotend's page says so.
Extreme flow
80 mm³/s and up, our editorial class, set from the maker's published figure or a credited independent test; where neither exists it's our call, and the hotend's page says so.

Verdicts are judged against other hotends in the same flow class.

Showing 48 of 48 hotends

Phaetus

Rapido 2 HF

The baseline Rapido 2 — reliable, well-supported, and a proven workhorse for standard printing.

290°C
Phaetus

Rapido 2 UHF

The high-flow standard for CoreXY builds — long melt zone, broad toolhead support.

290°C
Mellow 3D

Goliath Air

VzBoT's high-flow hotend — a 50mm meltzone and 100W heater, but not a beginner install.

550°C
Mellow 3D

Goliath Water

The water-cooled Goliath — for builds already running a liquid cooling loop.

550°C
Phaetus

Rapido X

Phaetus's highest-flow Rapido — 100 mm³/s by Phaetus's own figure, with a 120W ceramic heater

360°C100 mm³/s
Triangle Lab

Dragon V2.0

Trianglelab's standard-flow Dragon — the original V6 drop-in

450°C46.08 mm³/s
Triangle Lab

T-Volcano Dragon HF

Dragon hotend with a Volcano-length melt zone — complete kit with heater and thermistor

Phaetus

Rapido 2 Plus HF

The serious-material upgrade — same HF flow, but 350°C and PT1000 for PA, PC, and composites.

350°C
Triangle Lab

Dragon LC

Liquid-cooled Dragon — water-circulation heatsink, 500°C rated

500°C
Phaetus

Rapido 2 Plus UHF

The top of the Rapido 2 lineup — maximum flow AND maximum temperature for no-compromise builds.

350°C
E3D

Revo Micro

E3D RapidChange Revo Micro — ~30g with tool-free nozzle swaps

Slice Engineering

Mosquito Prime Liquid

Prime's 116 mm³/s melt zone with liquid cooling for heated chambers — the industrial end of the line.

500°C116 mm³/s
Phaetus

Rapido 2F

A compact, high-temp option for weight-sensitive builds — but the flow ceiling is real.

350°C36 mm³/s
Takoto

HE20

Takoto HE20 — a crash-proof, dual-cartridge high-flow hotend for large-format builds

320°C
V9 Hotend

V9.2

$220 USD | currently sold out | water cooling required

550°C
Slice Engineering

Mosquito Prime Conduction

Prime's 116 mm³/s melt zone with no fan at all — conduction cooling for hot, enclosed builds.

500°C116 mm³/s
Phaetus

XG

40 g extreme-gradient hotend with one-handed nozzle changes

300°C
E3D

Revo Voron

E3D's lightest Revo — 25g, cold nozzle changes, built for the StealthBurner

300°C13 mm³/s
Slice Engineering

Mosquito Prime LGX ACE

Prime's 116 mm³/s melt zone on Bondtech's short-path LGX ACE cold block — maximum flow for flexibles.

500°C116 mm³/s
Luke's Lab

Chube Conduction

The fan-free Chube — conduction cooling takes the heatsink fan off the toolhead entirely.

500°C
Slice Engineering

Copperhead

Slice's affordable open-source all-metal hotend — 450°C, modular, $69.99

450°C33 mm³/s
Mellow 3D

HeatCore 4

Mellow's UHF kit with ALPS nozzle leveling — 400°C, 40 mm³/s

400°C40 mm³/s
Slice Engineering

Mosquito Conduct

Fan-free Mosquito for enclosed industrial printers — conduction cooling, 500°C

500°C35 mm³/s
BRS Engineering

Dragon Ultra CF

BRS's carbon-fiber-proof Dragon — ceramic composite heat break, PT1000, built for PA-CF

Slice Engineering

Mosquito

The original lightweight all-metal hotend — 500°C, 37g, one-handed nozzle changes

500°C35 mm³/s
Triangle Lab

Dragon Ace

Next-gen Dragon with HF heat break, Volcano block, and ceramic pad heaters

74 mm³/s
Slice Engineering

Mosquito Magnum+

Slice's industrial high-flow hotend — 90 mm³/s, 500°C, up to 100W

500°C90 mm³/s
Mellow 3D

Goliath Lite Air

Lite version of the Mellow/VzBoT Goliath, designed by Mellow in collaboration with the VzBot team. Max temperature 350 C (vs 450 C on the original Goliath). TC4 titanium heatbreak and titanium fixing screws, 110W 24V ceramic heater plates, PT1000 temperature sensor, hardened steel V6 nozzle (carbon-fibre capable). Flow rated 50+ mm3/s by Mellow. Air-cooled variant. Price basis: Mellow store regular $131.00 (on sale $68.12 at time of adding, Nov 2026).

350°C50 mm³/s
Tricorn

Tricorn Conduction

Same Tricorn hardware, fan dependency removed — best for high-temperature enclosed builds.

500°C
Tricorn

Tricorn Air

An open-source hotend that re-thinks the heat block from first principles — and mostly gets it right.

500°C
Slice Engineering

Mosquito Magnum

The high-flow Mosquito — 40 mm³/s in the same 41g footprint

500°C40 mm³/s
Triangle Lab

CHC XL Liquid

Trianglelab's ceramic high-flow hotend — liquid-cooled for heated chambers

300°C
Mellow 3D

DualVelo Air Lite

Mellow's large-format hotend-and-extruder unit — $129, specs thin on the ground

400°C
Phaetus

Dragon UHF

Phaetus's ultra-high-flow Dragon — 500°C, V6-compatible drop-in

500°C
Mellow 3D

Goliath Lite Water

Lite version of the Mellow/VzBoT Goliath, designed by Mellow in collaboration with the VzBot team. Max temperature 350 C (vs 450 C on the original Goliath). TC4 titanium heatbreak and titanium fixing screws, 110W 24V ceramic heater plates, PT1000 temperature sensor, hardened steel V6 nozzle (carbon-fibre capable). Flow rated 50+ mm3/s by Mellow. Water-cooled variant. Price basis: Mellow store regular $169.90 (on sale $88.35 at time of adding, Nov 2026).

350°C50 mm³/s
Triangle Lab

CHC XL Air

Trianglelab's ceramic high-flow hotend — air-cooled, 48g

300°C
Phaetus

NexG

Phaetus's extreme-gradient Dragon-footprint hotend — kinematic coupling, V6 nozzles

280°C
Slice Engineering

Mosquito Liquid

The Mosquito for heated chambers — liquid-cooled, 500°C, 74g

500°C35 mm³/s
Slice Engineering

Mosquito Prime Air

Slice bills it as the world's highest-flow hotend — 116 mm³/s (Slice's PLA figure), 500°C, and an industrial price tag.

500°C116 mm³/s
Takoto

HE50

Takoto HE50 — the HE20 stretched 3x for >50 mm³/s flow

320°C50 mm³/s
Phaetus

neXt G Fiber

The fiber-printing neXt G — PT1000, hardened steel nozzles, RCC-coated heat break

320°C
Luke's Lab

Chube Air

A genuinely original high-flow design — impressive specs, but ecosystem support is still maturing.

500°C
Luke's Lab

Chube Compact

A compact V6-compatible hotend with 500°C headroom — best for weight-sensitive toolheads.

500°C
Phaetus

Dragon HF

Phaetus's high-flow Dragon — 500°C, V6-compatible, heater sold separately

500°C
E3D

Chimera

True dual extrusion — two nozzles, two temperatures, one compact 30×28mm footprint

300°C
Phaetus

Dragon ST

The standard-flow Dragon — 500°C all-metal, V6-compatible

500°C
E3D

Lite6

E3D's budget entry hotend — V6-compatible, PTFE-lined, capped at 240°C

240°C
E3D

V6

The all-metal standard every other hotend is measured against — 300°C, M6 nozzles, endless mounts

300°C10 mm³/s

Sort & filter

Sort by
Flow
Brand
Price

Sort

Sort by

Filters

Brand
Price