V9.2
V9 Hotend

V9.2

Contender $220 USD | currently sold out | water cooling required
USD $220
Max Temp 550°C

Where to buy (1)

Listed at ~$220 USD. Vendors set their own prices.

V9 Hotend (direct, via email) (opens in a new tab)

Full Specifications

Max Temperature 550°C
Heat Break Steel, Ø2.00mm bore, proprietary hardened surface
Heat Block Steel, water-cooled block with barb fittings (3mm / 1/8" tubing)
Nozzle Thread M6x1 — 7mm thread engagement
Mount Style 4x M3 Ø16mm (Voron Standard)
Fan Size N/A — water cooled
Thermistor Custom Ø3x15mm cartridge
Heater Type Ø6x cartridge (20–35mm)
Weight 46g

Pros & Cons

Pros
  • All-steel construction with proprietary hardened surface — harder than abrasive filament fiber, never wears
  • Meltzone dimensions remain constant after 1000kg of filled filament
  • 550°C max temp — highest of any currently available hotend
  • 39.5mm meltzone length enables extremely high flow rates
  • Spring rate >1500N/mm — exceptionally stiff, eliminates flex artifacts
  • Standard M6x1 nozzle thread, 4x M3 Ø16mm mounting (Voron standard)
  • Free integration STEP/STL files on website
Cons
  • Requires water cooling — significant setup complexity vs air-cooled hotends
  • Currently SOLD OUT ($220 USD)
  • Extremely small production runs (21 units in last batch)
  • Solo operator — support and supply are unpredictable
  • Thermal conductivity ~50 W/mK (steel) — requires MPC control for best results
  • Limit heater to 80W during initial heat-up to prevent discoloration
  • No published max flow data

Now with more meltzone & less mass, v9 is back — it is made of steel and it will never wear, the filament path is comprised of materials & surfaces orders of magnitude harder than any fiber-filled filament. This means the physical dimensions of this hotend will never change. The meltzone will always remain exactly Ø1.80mm. The heatbreak will always remain exactly Ø2.00mm.

Where to Buy