Guides

Calibration, tuning, and how-to guides — practical steps for getting more from your 3D printer.

Showing 8 of 8 guides

Calibration Intermediate
Pressure Advance Tuning — Reading the Test and Applying Your Value

How to read a pressure advance test pattern, identify the correct value, and apply it in Klipper, Marlin, or RepRapFirmware.

Hardware Setup Beginner
Voron 2.4 vs Trident — Which One Should You Build?

A practical comparison of the Voron 2.4 and Voron Trident — build complexity, Z systems, max size, and which one is right for your goals.

Hardware Setup Beginner
CoreXY Motion System — How It Works

A complete reference on CoreXY motion system geometry, belt routing, and how it compares to other printer architectures.

Calibration Intermediate
How to Run Input Shaper Calibration on a Voron Printer

Input shaper calibration eliminates ringing and ghosting artifacts at high speed. This guide walks through ADXL345 wiring, SHAPER_CALIBRATE, and interpreting the results.

Calibration Beginner
First Layer Calibration: Getting Your Z Offset Right

A perfect first layer is the foundation of every successful print. This guide covers Z offset calibration for Klipper printers using paper, live adjustment, and the PROBE_CALIBRATE workflow.

Calibration Beginner
Klipper Bed Mesh: Why You Need It and How to Set It Up

No bed is perfectly flat. Bed mesh calibration maps the surface of your bed and compensates for warps and tilts automatically on every print. Here's how to configure it in Klipper.

Filament Beginner
Filament Drying: When You Need It and How to Do It Right

Wet filament causes stringing, bubbling, and weak layer adhesion. This guide covers which materials need drying, at what temperatures, and which dryers are worth buying.

Calibration Intermediate
How to Tune Pressure Advance on a Voron Printer

Pressure advance corrects for the lag between your extruder motor and the actual filament deposition at the nozzle. This guide walks through the Klipper calibration workflow from scratch.