Chube Conduction
Luke's Lab

Chube Conduction

Contender The fan-free Chube — conduction cooling takes the heatsink fan off the toolhead entirely.
USD $325.05
Max Temp 500°C

Full Specifications

Max Temperature 500°C
Heat Break Bi-Metal
Heat Block Copper Alloy
Nozzle Thread V6 (M6)
Mount Style 6x18mm bolt circle, M3 tapped
Fan Size None (conduction cooled)
Thermistor PT1000
Heater Type Cartridge
Weight 74g
Part Number CHUBE-COND

Pros & Cons

Pros
  • Conduction cooling eliminates fan dependency
  • 500°C max temp
  • V6 nozzle compatibility
  • M3 hardware throughout
  • 52mm meltzone — longest in the family
  • Up to 47.5mm heater cartridge support for higher wattage
Cons
  • Conduction cooling requires printer frame/mount to act as heatsink — not universally supported
  • Smaller community than established brands
  • More complex thermal setup than air-cooled variants
  • Fewer validated toolhead mounts available

The Conduction variant is where Chube's design philosophy gets most ambitious. By removing the fan and relying on thermal conduction through the mounting hardware, it eliminates one of the consistent failure points in high-chamber-temp builds: the hotend cooling fan.

In an enclosed printer running 60–70°C chamber temps, fan-cooled hotends work harder and can develop heat creep issues at sustained high flow. The Conduction sidesteps this entirely — the mount structure becomes the heatsink. The tradeoff is that this only works if your toolhead and mount are designed to conduct heat away efficiently, which limits compatible configurations compared to the Air variant.

At 52mm meltzone and support for up to 47.5mm heater cartridges (higher wattage options), the Conduction has the highest theoretical flow ceiling in the Chube lineup. For the right enclosed build — Voron 2.4 or Trident with a properly spec'd toolhead — it's a genuinely interesting alternative to water cooling.

Where to Buy