Home / Voron / Probe System

Probe Systems for Voron 2.4 & Trident

Your Z probe determines first-layer consistency across every print. The Voron team recommends Tap as the default — but Klicky and Beacon remain strong choices depending on your toolhead and priorities.

Showing parts for: Voron 2.4 Switch model →
Tap is the current recommended default Voron Tap eliminates the probe offset error inherent to dock-based probes and requires no calibration drift compensation. If you're running Stealthburner or XOL, Tap is the straightforward choice. Dock probes (Klicky, Euclid) are excellent when your toolhead doesn't support Tap. Beacon is the premium option for maximum scan speed and accuracy.

Probe options to consider

4 products
Contender
VoronDesign
Voron Tap
Nozzle-contactOfficial designNo dock required

The current recommended default from the Voron team. Uses the nozzle itself as the probe — no dock, no offset error, no magnetic debris attraction. Requires Stealthburner or a compatible toolhead. The most consistent Z calibration method available for Voron.

Buy at West3D →
Contender
jlas1 / Community
Klicky PCB
Magnetic dockEndstop-basedFrame-mounted dock

The original community magnetic probe for Voron. Docks on the frame, attaches magnetically before probing, and detaches cleanly. Repeatability is excellent when calibrated. The Klicky PCB version is significantly more reliable than earlier wire-mount designs.

Buy at Lab4450 →
Contender
Euclid / Community
Euclid Probe
Magnetic dockOpen sourceBoard-to-board connection

Open-source magnetic probe emphasizing dock reliability. Uses a board-to-board magnetic connection rather than SMD magnets, making the attach/detach motion more predictable. Excellent alternative when Klicky deploy reliability has been an issue.

Buy at Euclid Probe →
Contender
Beacon3D
Beacon
Eddy currentNo contactContact mode support

Eddy current proximity probe with exceptional repeatability and the fastest mesh scan speeds available. No physical contact means no nozzle wear during probing. Newer models add contact mode for absolute Z offset. Premium price, premium performance.

Buy at Beacon3D →

Affiliate links used — Modern Makes may earn a commission on purchases. This doesn't affect our recommendations. See disclosure.

Probe method comparison

Probe MethodDock requiredOffset errorRepeatabilityCost
Voron Tap Nozzle contact No None ~0.5µm ~$20
Klicky PCB Magnetic switch Yes XY + Z ~1µm ~$8
Euclid Magnetic switch Yes XY + Z ~1µm ~$15
Beacon Eddy current No Z only ~0.2µm ~$60

Repeatability figures are approximate community-reported values under controlled conditions. Your results depend on printer tuning and environment.