Voron fit
Xol is a community-developed Stealthburner alternative focused on reducing toolhead mass. By shaving weight from the main body and optimising the geometry, Xol achieves lower effective moving mass — which translates directly to better input shaping results and higher achievable print speeds.
The Xol project is maintained by Armchair Engineering and is one of the most actively developed community toolheads. It uses a modular carriage system called Xol-Carriage that separates the toolhead from the gantry mount, making hotend swaps faster.
For builders printing above 300mm/s regularly, Xol's mass advantage over Stealthburner is measurable. At standard speeds the difference is marginal — choose Xol if you're optimising for speed, choose Stealthburner if you want maximum community support and documentation.
Printed parts
- Xol main body
- Xol-Carriage (gantry mount)
- Hotend-specific duct
- Extruder mount (varies by extruder)
Required hardware
- M3 heat inserts
- M3 fasteners per BOM
- CAN bus toolhead board recommended (EBB36 or similar)
- ADXL345 or ADXL345 on toolhead PCB
Hotend fit
| Hotend | Max Temp | Flow | Status |
|---|---|---|---|
| Rapido 2 UHF | 320°C | 32mm³/s | SUPPORTED |
| Dragon HF | 300°C | 25mm³/s | SUPPORTED |
| NF-Crazy | 450°C | 30mm³/s | SUPPORTED |
| Revo Voron | 300°C | 20mm³/s | LIMITED |
Extruder fit
| Extruder | Gear Ratio | Weight | Status |
|---|---|---|---|
| Orbiter v2 | 7.5:1 | 175g | SUPPORTED |
| Galileo 2 | 9:1 | 180g | SUPPORTED |
| Sherpa Mini | 5:1 | 85g | SUPPORTED |
| Clockwork 2 | 50:17 | 210g | LIMITED · heavier |