Motion System

Linear rails, belts, pulleys, and lead screws. Type, spec, length, and brand tier.

Showing 123 of 123 parts

Gates

2GT Toothed Idler

OEM toothed idler — used where belt reversal requires tooth engagement

Idler
LDO

CNC All Wheel Drive Kit for Voron V2.4 and Trident

CNC all-wheel-drive conversion for V2.4/Trident — needs 4 S35-shaft motors

Motion Kit
Independent

Rock-em Sock-em Z Joints

$8.99 USD via Fabreeko | Set of 4 ball-joint Z joints - beta design

Z Joint
Gates

Gates 2GT 20T Drive Pulley

OEM pulley for all Voron and CoreXY XY motor drives — machined to 2GT spec

Pulley
HoneyBadger

Trident 9MM Conversion CNC Parts

CNC 9mm belt conversion for Trident — stiffer gantry, needs belts and bearings sourced separately

Belt Kit
Gates

GATES 2GT Closed Loop Belts

Genuine Gates PowerGrip 2GT closed-loop belts — straight-cut EPDM, no seam

Belt
HoneyBadger

Hybrid Ceramic Bearing Kit for Voron

Hybrid ceramic Voron bearing kit — Si3N4 balls, stainless bands, 10,000 RPM rated

Bearing
Independent

Beefy Z Idlers (BZI) for Voron

$8.99 USD via Fabreeko | 4-idler kit for Voron 2.4 / Micron / Doomcube

Idler
LDO

PEEK Leadscrew Nuts

LDO PEEK lead screw nuts — fixes POM wear, for Trident and V0

Coupler
LDO

MICRONPlus Motion Kit

Complete LDO motion kit for Micron+ — bearings, pulleys and 2GT belts

Belt Kit
HoneyBadger

V0.2 Ultimate Motion Kit

V0.2 motion kit — Gates belt, pulleys and bearings; both variants sold out

Belt Kit
HoneyBadger

Positron Black Steel Pre-Modified Rails

Niche Pick — the pre-modified black-steel rail set made for the Positron printer

Linear Rail
Gates

Gates 2GT Belt 6mm

The standard XY drive belt for all Voron and most prosumer CoreXY builds

Belt
Ultimate Linear Systems

MGN12C Linear Rail

High-end Taiwanese rail — ±1µm/1000mm accuracy, but premium-priced and less proven in Voron builds

Linear Rail
BRS Engineering

AWD Drive 2.1

Full AWD kit for any V-Core — printed parts, bearings, GT2 pulleys included

Drive Kit
BRS Engineering

Z Oldham Decoupler

BRS Oldham decoupler — kills Z wobble with no backlash, rated for 25kg+ beds

Coupler
SLM

XY Joint and Tensioner Kit for K3

$126.61 USD via NorthPrint3D | SLM aluminum 12mm-belt upgrade for Annex K3 - preorder

XY Joint Kit
HoneyBadger

MGN15 Steel Linear Rails

Wide 15mm rail in two materials — stainless Class H or black bearing steel Class C

Linear Rail
LDO

LDO MGN9H Linear Rail

Licensed OEM supplier — consistently recommended alongside Hiwin by Voron-affiliated vendors

Linear Rail
Mellow 3D

Wobble X

Mellow Z-wobble decoupler for T8 lead screws — lets the screw float instead of bending the gantry

Coupler
HoneyBadger

MGN7H Stainless Steel Rails

Heavy-preload 7mm rail — needs a break-in, best for V0/Micron and Tap

Linear Rail
BRS Engineering

GT1.5 Anti-VFA Belt Conversion Kit

from €69 EUR | best anti-VFA belt upgrade available for RatRig/Voron

Belt Kit
Hiwin

Hiwin MGN12H Linear Rail

OEM 12mm rail — standard for V2.4 and Trident gantry and Z axis

Linear Rail
Independent

BFI - Beefy Front Idlers for Voron

$8.99 USD via Fabreeko | 2-idler kit, universal for Trident / 2.4 / Salad Fork / Micron

Idler
RatRig

RatRig Pillow Blocks

$35.00 USD via Fabreeko | Set of 3 machined 6061 pillow blocks

Bearing
HoneyBadger

Bearings for Annex K3

Full bearing set for the Annex K3 — F695, 625 and 623

Bearing
HoneyBadger

V2.4 Ultimate Motion Kit with Gates Belts

Complete Gates-belt motion kit for V2.4 — currently out of stock

Belt Kit
LDO

Micron 160/180 Stainless Steel Rail Kit

LDO stainless rail kit for the Micron 160/180 — the correct rails for the build

Linear Rail
LDO

V0/0.1 Linear Rails Kit (5 pieces)

Complete LDO rail set for a V0/V0.1 — five 150mm 440C stainless MGN7H rails

Linear Rail
BRS Engineering

L3VER M2 Block with Tensioners Module

Motor blocks with integrated tensioners — shouldered screws, ABEC-7 bearings

Motor Block
BRS Engineering

AWD Drive 1.35a

Hardware-only AWD kit for any V-Core — damper-mounted, ABEC bearings

Drive Kit
Gates

2GT Belt 9mm

9mm Gates belt for AWD builds — wider belt handles the higher forces of 4-motor drive

Belt
BRS Engineering

GT1.5 26T Pulley (9mm Belt)

BRS GT1.5 26T pulley for 9mm belts — same pitch diameter as a GT2 20T

Pulley

GT2 80T Pulley

80T GT2 pulley — 5mm bore for 6mm belts, used in M4/V2.4 motion systems

Pulley
BRS Engineering

Disc Coupler

Dual-disc zero-backlash coupler — beats spider couplers on concentricity

Coupler
Mellow 3D

GATES-LL-1.5GT Belt Kit (6/9/10/12mm)

Genuine Gates GT1.5 belt and pulley kit — the best-verified value in the table

Belt Kit
BRS Engineering

V-Core 3/4 Z1 Preloaded Rails Kit

Black Z1 preloaded rails for the V-Core XY — light preload, budget alternative to Hiwin

Linear Rail
BRS Engineering

L3VER M1 REFRESH V1.5

Rear belt tensioner — precise tension without using the motors

Tensioner
Generic

F695 2RS Smooth Idler Bearing

Standard smooth idler for all Voron CoreXY belt path outer reversals

Bearing
ChaoticLab

CNC Tool-free Z-Axis Tensioner

ChaoticLab all-metal Z belt tensioner for Voron 2.4 R1/R2

Gates

GATES 1.5GT 9mm RF Belt

Gates 1.5GT 9mm reinforced open belt — fiberglass cord, nylon tooth facing

Belt
BRS Engineering

Z-Upgrade 2.8 Definitive Edition

Proven ballscrew Z for V-Core 3.0/3.1 — 350+ users since 2021

Z Upgrade Kit
Hiwin

V-Core 3/4 Z0 Preloaded HIWIN Rails Kit

Genuine Hiwin Z0 rails for the V-Core XY — the no-compromise rail upgrade

Linear Rail

Tr8 8mm Anti-Backlash POM Nut

Anti-backlash POM nut for Tr8 lead screws — V0.1 and Trident

Coupler
HoneyBadger

MGN9C Stainless Steel Rails

Community-favourite clone rail — pre-lubed, medium-high preload, 1-year warranty

Linear Rail
Gates

GATES GT3 Open Belt

Genuine reinforced Gates GT3 open belt — ~20% stiffer than 2GT, backwards compatible

Belt
Hiwin

V-Core 3/4 Z1 Preloaded HIWIN Rails Kit

Genuine Hiwin Z1 rails for the V-Core XY — light preload, the no-compromise rail upgrade

Linear Rail
BRS Engineering

Precision Motor Block

Shoulder-bolt XY motor block — quieter, more precise V-Core 3 motion

Motor Block
BRS Engineering

Z-Upgrade 4.0b Ballscrew System

from €149 | significant improvement, non-trivial install

Z Upgrade Kit
LDO

LDO MGN12H Linear Rail

Licensed OEM-quality 12mm rail — recommended for V2.4/Trident gantry and Z axis

Linear Rail
BRS Engineering

V-Core 3/4 Z0 Preloaded Rails Kit

Black Z0 preloaded rails for the V-Core XY — the budget alternative to the Hiwin kit

Linear Rail
E3D

GT2 Pulley 16 Tooth

16T GT2 drive pulley — more torque than 20T, lower top speed

Pulley
Generic

Oldham Coupler

Essential companion to lead screw Z — eliminates Z binding from shaft misalignment

Coupler
Hiwin

Hiwin MGN9H Linear Rail

The OEM reference standard — tight tolerances, consistent preload, zero quality lottery

Linear Rail
BRS Engineering

V-Core 3 Ballscrews Kit SFU1204

C7 ballscrew kit for V-Core 3 — BRS tolerance-checked, 450mm smallest

Ball Screw

GTC-19X26 High Vibration Damping Rubber Coupling

High-damping rubber shaft coupler — 19mm OD x 26mm, 5mm bore

Coupler
Generic

Generic MGN9H Linear Rail

Quality lottery — unknown manufacturer sourcing means no consistency guarantee

Linear Rail
Funssor

CNC EVA Belt Grabber Clips — V-Core 3.1/4

CNC aluminum face belt grabber clips (2 per lot) for EVA 2.0/3.0 toolheads on the RatRig V-Core 3.1/4.

Funssor

Micron R1 AB Drive Plates

CNC-machined aluminum upper and lower AB drive / motor mount plates (pinned, black) for the Micron R1.

Drive Kit
Funssor

CNC MiniSB Carriage — Micron/Salad Fork

CNC aluminum Mini StealthBurner toolhead X-axis carriage for the Micron and Salad Fork, for MGN9C/H rails.

XY Joint Kit
Funssor

CNC Front Clamps — V-Core 4

CNC aluminum front clamps (pair) for the RatRig V-Core 4.

Funssor

CNC X Motor Cage + Tensioner Kit — V-Minion Alpha

CNC aluminum X-axis motor cage mount and belt tensioner kit for the RatRig V-Minion Alpha. Price is for the full kit (both parts); the motor cage and tensioner are also sold separately.

Motion Kit
Funssor

CNC Z Motor Mounts — Salad Fork

CNC aluminum Z stepper motor mounts (left/right/rear set) for the Salad Fork, for MGN7H rails on 1515 extrusion. Price is for the full kit; partial sets are also sold.

Motor Block
Funssor

CNC Z Tensioners — Micron+

CNC aluminum tool-free dial-adjustable Z belt tensioners with idlers (set of 4) for the Micron and Micron+. A live-idler style Z tensioner kit is also sold.

Tensioner
Funssor

CNC Z Idlers — Annex K3

CNC-machined aluminum Z idler kit (3 blocks with toothed pulleys, for the three Z positions) for the Annex Gasherbrum K3.

Idler
Funssor

CNC HD12 XY Joints — HevORT

CNC aluminum XYHD12 XY joint kit (MGN12H) for the HevORT, for 20.3mm carbon fiber tube gantry beams.

XY Joint Kit
Funssor

CNC XY Motor Decoupler — Voron 2.4/Trident

CNC aluminum NEMA17 XY motor drive decoupler/damper mounts (pair, with couplings, dampers, and shafts) for the Voron 2.4 and Trident.

Coupler
Funssor

Bed Carriage Plate with Piezo Sensor — Trident

Aluminum bed carriage plate with piezo/strain-gauge bed sensor for the Voron Trident, in 250/300/350mm sizes. Price is for the 250mm size.

Funssor

CNC Z Belt Covers — Voron 2.4

CNC aluminum Z belt covers (set of 4) for the Voron 2.4.

Funssor

CNC Y-Belt Clamp — V-Core 4

CNC aluminum Y-belt clamp body and cap kit for the RatRig V-Core 4.

Funssor

CNC Drive Frame Unit — Salad Fork

Lightweight CNC aluminum AB motor drive frame unit for the Salad Fork, for 1515 extrusion.

Drive Kit
Funssor

CNC Z Axis Arm by Karbomod — V-Core 4

CNC-machined Z axis arm/bracket (REV4, designed by Karbomod) for the RatRig V-Core 4. Price is for the arm parts; a full kit is also sold.

Z Joint
Funssor

CNC IDEX XY Motor Cage — V-Core 4

CNC aluminum XY motor mount cage kit for the RatRig V-Core 4 Hybrid IDEX. Price is for the red version; black is also sold.

Motor Block
Funssor

CNC Z Belt Covers — Micron/Salad Fork

CNC aluminum Z belt covers (set of 4) for the Micron and Salad Fork, for 1515 extrusion.

Funssor

CNC Kinematics Bed Mount — Trident

CNC aluminum kinematics bed base plate (DoubleT design) for Trident Z leveling, in 250/300/350mm sizes. Price is for the 250mm plate alone; versions with the kinematics mounts are also sold.

Funssor

CNC XY Motor Supports — V-Core 3.1

CNC aluminum XY motor supports (left/right pair) for the RatRig V-Core 3.1.

Motor Block
Funssor

CNC Z Belt Drive Kit — Micron+

CNC aluminum Z belt drive units (set of 4, with bearings) for the Micron+ 180mm.

Belted Z
Funssor

CNC XY Joiner Gantry Supports — V-Core 4.1

CNC XY joiner gantry support pieces (2 per lot) for the RatRig V-Core 4.1.

XY Joint Kit
Funssor

CW2 Skeletonized Motor Plates

All-metal skeletonized (hollow-out) motor plates for the StealthBurner Clockwork 2 extruder (Voron 2.4/Trident). Price is for the silver parts set; black parts and a full CW2 extruder kit are also sold.

Drive Kit
Funssor

CNC AB Drive Units — Voron 2.4

Ultralight CNC aluminum AB motor drive plates (pair, 5mm) for the Voron 2.4 R2. Front tensioners sold separately.

Drive Kit
Funssor

CNC Y Motor Cage — V-Minion

CNC 6061 aluminum Y-axis motor mount cage for the RatRig V-Minion.

Motor Block
Funssor

CNC Front Idler Tensioners — Voron 2.4

CNC aluminum front idler tensioners with BFI idlers (pair) for the Voron 2.4, for 6mm belts.

Tensioner
Funssor

CNC X Carriage MGN12H — Voron 2.4/Trident

CNC aluminum MGN12H X carriage for the Voron 2.4 R2 and Trident, in 6mm and 9mm GT2 belt versions.

XY Joint Kit
Funssor

CNC KGLM-03 Z Joints — Micron

CNC aluminum KGLM-03 Z joints (set of 4) for the Micron 120/180 and Micron+. A solid rigid Z joint kit is also sold.

Z Joint
Funssor

CNC Z Belt Drive Kit — Voron 2.4

CNC aluminum Z belt drive units (set of 4) for the Voron 2.4 R2.

Belted Z
Funssor

CNC MiniSB Carriage — Voron 0.2

Lightweight CNC aluminum toolhead carriage for the Voron 0.2 Mini StealthBurner, for MGN7H or MGN9C rails. Homing switch not included.

Carriage
Funssor

CNC XY Joints — Voron 0.2

CNC aluminum XY joints (left/right pair) for the Voron 0.2 (MGN7H only). Price is without bearings; a with-bearings version is also sold.

XY Joint Kit
Funssor

CNC Z Live Idlers — Micron

CNC aluminum Z live idler belt tension units (set of 4, with idler pulleys) for the Micron. A dial-adjustable Z tensioner kit is also sold.

Tensioner
Funssor

CNC Y Idler Mount — V-Minion

CNC 6061 aluminum Y-axis idler mount block for the RatRig V-Minion.

Idler
Funssor

CNC Top Bearing Mounts — Micron/Salad Fork

CNC aluminum NEMA14 top bearing mounts (pair, double-shear stepper mounts with bearings) for the Micron and Salad Fork.

Motor Block
Funssor

CNC X Idler Tensioner + Motor Cage Kit — V-Minion

CNC aluminum X idler tensioner and motor cage kit for the RatRig V-Minion. Price is for the motor cage version; a no-idler version is also sold.

Motion Kit
Funssor

CNC Ultralight XY Joints — Voron 0.2

Ultralight CNC aluminum XY joint pair for the Voron 0.1/0.2 (MGN7H rail). Price is for the joints only; a joints-plus-gantry-beam version is also sold.

XY Joint Kit
Funssor

G2Z Galileo 2 Z Drive — Micron R1

CNC aluminum Galileo 2 (G2Z) Z drive upgrade kit for the Micron R1, with NEMA14 pancake motor (4 motor plates + 4 drive housings).

Drive Kit
Funssor

CNC Front Idler Tensioners — Micron

CNC aluminum pinned front idler belt tensioners (pair) for the Micron, for 15mm extrusion.

Tensioner
Funssor

CNC Ultralight XY Joints — V-Core 4.1

Ultralight CNC aluminum XY joint kit for the RatRig V-Core 4.1 (18×18mm tube).

XY Joint Kit
Funssor

CNC Z Upgrade Kit — V-Minion Alpha

CNC aluminum Z axis upgrade kit for the RatRig V-Minion Alpha (Z cap, decoupler nut mount, and Z motor cage). Price is for the full upgrade; parts are also sold individually. Lead screw nut not included.

Motion Kit
Funssor

CNC Z Motor Mounts — Voron 2.4

CNC aluminum Z motor mounts with belt tensioner plates (4 of each) for the Voron 2.4 R2.

Motor Block
Funssor

M3 Threaded Pins — Voron 2.4/Trident

All-metal M3 threaded pins for Gates idlers (Double T design) for the Voron 2.4 and Trident, in 20mm and 30mm lengths. Price is for 6 pieces, 20mm.

Idler
Funssor

CNC 2WD Upgrade Kit — Trident

CNC aluminum 2WD upgrade kit for the Voron Trident: AB motor drive units, XY jointers, and front idler tensioners for 6mm GT2 belts (NEMA17). Price is for the full 2WD kit; the front idler, XY jointer, and AB motor sets are also sold separately.

Motion Kit
Funssor

Sexbolt Z Endstop Kit

Hartk Sexbolt Z endstop mod kit for Voron 2.4 and Trident: endstop PCB plus hardware (bolt and fittings).

Z Joint
Funssor

CNC Double Shear Stepper Mount — Trident/VzBot

CNC aluminum double-shear NEMA17 stepper motor mount for the Voron Trident and VzBot.

Motor Block
Funssor

CNC AB Motor Plate Kit — Micron+

CNC aluminum AB motor plates with front idlers for the Micron/Micron+. Price is for the AB plate + front idler set; versions adding XY joints and rear tensioning are also sold.

Drive Kit
Funssor

CNC XY Jointer + Tensioner Kit — Voron 2.4

CNC aluminum XY motor jointers, AB motor jointers, and front tensioners for the Voron 2.4 R2 (MGN12/MGN9, 6mm belts). Price is for the full kit; the XY joint, tensioner, and AB motor sets are also sold separately.

Motion Kit
Funssor

CNC Z Motor Mounts — Annex K3

CNC-machined aluminum Z axis motor mount kit (4 pieces, 9mm thick plates) for the Annex Gasherbrum K3, for long-shaft motors.

Motor Block
Funssor

CNC 2WD Ultimate Kit 6mm — Voron 2.4/Trident

CNC-machined 2WD ultimate upgrade kit for the Voron 2.4 and Trident, 6mm belt version: motor drive units and front tensioners. Price is for the base kit without belt clamps; a version with clamps is also sold.

Motion Kit
Funssor

CNC Hybrid Conversion Kit — V-Core 3.1

CNC 6061 aluminum hybrid conversion kit for the RatRig V-Core 3.1 (XY joiners and front tensioners for Hybrid/AWD builds). Price is for the full kit; the XY jointer and front tensioner sets are also sold separately. Bearings not included.

Motion Kit
Funssor

XY Axis Plate — V-Minion

X/Y axis plate (7mm thick) for the RatRig V-Minion, drilled for MGN12H rails (rails not included).

Funssor

Pandora CNC XY Joints — Voron 0.1

Pandora/LwX CNC aluminum XY joints for the Voron 0.1 (fits MGN7 and MGN9 rails). Price is for the joints only; the beam and a full kit are also sold.

XY Joint Kit
Funssor

CNC 2WD Ultimate Kit — Salad Fork

CNC aluminum 2WD ultimate upgrade kit for the Salad Fork: AB motor plates, rear tensioning, front idlers, and XY joints (NEMA17, 6mm belts).

Motion Kit
Funssor

CNC Live Idler XY Joints — Voron 2.4/Trident

CNC aluminum live-idler XY joints with idlers (pair) for the Voron 2.4 and Trident, for 6mm belts; a 9mm version is sold separately.

XY Joint Kit
Funssor

CNC XY Joints — Micron/Salad Fork

Lightweight CNC aluminum XY joints (left/right pair, black anodized) for the Micron and Salad Fork, for 15mm extrusion.

XY Joint Kit
Funssor

Ultralight XY Joints by Sergii — Voron 2.4/Trident

Ultralight CNC-machined 6061 aluminum XY joints (pair, by Sergii) for the Voron 2.4 R2 and Trident, for MGN9 rails and 6mm belts.

XY Joint Kit
Funssor

CNC XY Rails Mounts — Annex K3

CNC aluminum XY axis motion kit for the Annex K3: rail mounts and belt tensioners for 6.5mm normal linear rails, designed for 9mm belts. Note: does not work with RobotDigg or LDO rails. Price is for the Belt Tension variant (4 blocks + 4 belt clamps); a full Rails Mounts set is also sold.

Motion Kit
Funssor

CNC XY Joints with Gates Idlers — Voron 2.4/Trident

All-metal CNC XY joints (pair, 5mm plate) with Gates idlers and screws for the Voron 2.4 R2 and Trident. Price is for the full kit; plates alone are also sold.

XY Joint Kit
Funssor

CNC Zero-Offset GE5C Z Joints — Voron 2.4

CNC aluminum zero-offset Z joints with GE5C bearings (set of 4, with screws and washers) for the Voron 2.4.

Z Joint
Funssor

CNC Ultralight XY Joiners — V-Core 3.1

Ultralight CNC aluminum XY joiners (left/right pair) for the RatRig V-Core 3.1, for MGN9C/MGN12C rails. Price is without bearings; a with-bearings version is also sold.

XY Joint Kit
Funssor

CNC Plate Kit — V-Core 3.1

CNC aluminum plate set for the RatRig V-Core 3.1: idler plate, motor plates, X carriage plates, and XY joiner plate. Price is for the full kit; individual plates are also sold.

XY Joint Kit
Funssor

CNC AWD Motor Mount Tensioner — Voron 2.4

CNC aluminum AWD stepper motor mount with tensioner for the Voron 2.4, in NEMA17 and NEMA14 versions. Price is for the NEMA17 version.

Tensioner
Funssor

CNC Rigid Z Joints — Micron

CNC aluminum rigid fixed Z joints (set of 4, solid blocks) for the Micron, for MGN7H rails. A KGLM-03 style Z joint kit is also sold.

Z Joint
Funssor

CNC Fourbie AWD Mod — Voron

CNC aluminum AWD motor mounts for the Voron Fourbie QUADXY AWD mod (NEMA17), in MGN12H and MGN9H versions.

Drive Kit
Funssor

CNC 2WD Ultimate Kit 9mm — Voron 2.4/Trident

CNC-machined 2WD ultimate upgrade kit for the Voron 2.4 and Trident, 9mm belt version (NEMA17): motor drive units and front tensioners. Price is for the base kit without belt clamps; versions with clamps and XY joints are also sold.

Motion Kit
Funssor

CNC Rigid Z Joint Kit — Voron 2.4

CNC-machined rigid fixed Z joints (set of 4) for the Voron 2.4, silver finish.

Z Joint
Funssor

CNC Belt Clamps — Voron 2.4

CNC belt clamp blocks (5mm) for the Voron 2.4 quad gantry. Price is for 4 pieces; 8-piece sets are also sold.

Sort & filter

Sort by
Brand
Price

Sort

Sort by

Filters

Brand
Price