Silicone Bed Heater 300x300mm 750W
Keenovo

Silicone Bed Heater 300x300mm 750W

Contender Voron 2.4 300mm BOM standard — 750W at AC reaches 110°C+ quickly and holds it under print load
USD $79.91

Where to buy (1)

Listed at ~$80 USD. Vendors set their own prices.

Keenovo / AliExpress (opens in a new tab)

Full Specifications

Type Bed
Wattage 750W
Voltage AC
Size 300×300mm
Thermistor Included true
SSR Required true

Pros & Cons

Pros
  • 750W at AC line voltage has substantial headroom — reaches 110°C fast and recovers quickly from bed opening
  • OEM Keenovo quality — even silicone heating element, consistent watt density across the pad
  • Built-in overheat thermal fuse as standard — same safety spec as the 250mm variant
  • The V2.4 BOM reference heater — community build guides, PID values, and wiring diagrams are written around this unit
  • Available in 110V and 220V
Cons
  • 750W requires an SSR rated for the load — verify SSR current spec (40A SSR has substantial headroom at typical mains amperage)
  • AC mains wiring required inside the printer — ground the frame, protect conductors from pinch points
  • Lead time from Keenovo AliExpress store can extend 2-4 weeks
  • 300×300mm pad size is specific to V2.4 300 — not a stock size for RatRig or VzBot without customization

Where to Buy